Ac Power - Toshiba TECRA M2 User Manual

It is recommended to leave the computer off until the its interior reaches
room temperature even though the DC IN 15V indicator stops blinking.
If the computer has reached room temperature and still does not start, or if
it starts but shuts down quickly contact your dealer.
Computer shuts down
and its DC IN 15V
indicator is flashing in
green

AC power

If you have trouble turning on the computer with the AC adaptor connected,
check the DC IN 15V indicator. Refer to Chapter 6, Power and Power-Up
Modes for more information.
Problem
AC adaptor doesn't
power the computer
(DC IN 15V indicator
does not glow green)
Battery
If you suspect a problem with the battery, check the DC IN 15V indicator
as well as the Battery indicator. For information on indicators and battery
operation see Chapter 6, Power and Power-Up Modes.
Problem
Battery doesn't power
the computer
TECRA M2
Indicates a problem with the heat dispersal
system. Please contact your dealer.
Procedure
Check the connections. Make sure the cord is
firmly connected to the computer and a power
outlet.
Check the condition of the cord and terminals. If
the cord is frayed or damaged, replace it. If the
terminals are soiled, wipe them with cotton or a
clean cloth.
If the AC adaptor still does not power the
computer, contact your dealer.
Procedure
The battery may be discharged. Connect the AC
adaptor to charge the battery.
Troubleshooting
9-5