External Monitor; Television - Toshiba Satellite P5001 User Manual

Optional Devices

External monitor

An external analog monitor can be connected to the external monitor port
on the computer. The computer supports VGA and Super VGA video
modes. To connect a monitor, follow the steps below.
The hibernation and sleep feature can be used with an external monitor.
Simply enable hibernation and sleep and the computer will maintain the
data as it is displayed on the external monitor.
1. Connect the monitor to the external monitor port.
2. Turn the monitor's power on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
You can use the HW Setup to select between Auto-Selected and System
LCD Only displays. Refer to Chapter 7,
If you have selected System LCD Only under the Display options of the HW
Setup, the internal LCD will be active when you turn on the computer, even
if the external monitor is connected. If Auto-Selected is selected, only the
external monitor will be active.
To change the display settings, press Fn+F5. If you disconnect the monitor
before you turn the computer off, be sure to press Fn+F5 to switch to the
internal display. Refer to Chapter 5,
keys to change the display setting.

Television

A coaxial cable can be connected to the TV in port on the computer,
allowing you to view cable TV with your computer (depends on the model
you purchased). To connect a coaxial cable, follow the steps below.
1. Turn the computer off.
2. Connect one end of a coaxial cable (not supplied) to the TV in port on
the computer.
8-12
All manuals and user guides at all-guides.com
HW Setup.
The Keyboard, for details on using hot
User's Manual