Power-Up Modes; Panel Power On/Off; System Auto Off - Toshiba TECRA M2 User Manual

Power-up modes

The computer has the following power-up modes:
■
Boot: Computer shuts down without saving data. Always save your work
before you turn the computer off in boot mode.
■
Hibernation: Data in memory is saved to the hard disk.
■
Standby: Data is maintained in the computer's main memory.
Refer also to the sections Turning on the power and Turning off the power
in Chapter 3, Getting Started.
Windows utilities
You can specify the setting in TOSHIBA Power Saver.
Hot keys
You can use hot keys Fn + F3 to enter Standby mode and Fn + F4 to enter
Hibernation. See Chapter 5, The Keyboard for details.

Panel power on/off

You can set up your computer so that power turns off automatically when
you close the display panel. When you open the panel, power turns on in
Standby or Hibernation mode but not in boot mode.
If the panel power off function is enabled and you use Shut down Windows,
do not close the display until the shut down function is completed.

System Auto Off

This feature turns the system off automatically if it is not used for a set
duration. The system shuts down in Standby mode or Hibernation mode in
Windows.
TECRA M2
Power and Power-Up Modes
6-18