Displaying Movies On A Tv Or Crt - Toshiba TECRA M2 User Manual

TV
You can connect a television set to the Video out jack on the computer.
Follow the steps below.
Using the TOSHIBA Console button
1. Connect the TV adaptor cable's S-Video plug to the Video out jack on
the computer.
2. Connect the TV adaptor cable's S-Video plug to the S-Video jack on the
TV.
3. Press the TOSHIBA Console button.
You can use the hot keys Fn + F5 to change the display device. Refer to
Chapter 5, The Keyboard.
When changing to "TV OUT" by "TOSHIBA Console button", it is "TOSHIBA
controls" and it is necessary to set "TV OUT" as "TOSHIBA Console button"
beforehand.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below.
■
■
■
■
■
■
Changing the resolution
If you want to change the resolution, follow the steps below.
1. Open Display properties and select the Settings tab.
2. Select Advanced.
3. Select the Adapter tab, then select List all modes.
4. Select a resolution from the menu.

Displaying movies on a TV or CRT

This section describes how to set up your system to display movies
simultaneously on your computer's internal LCD and on an external TV or
CRT monitor.
Follow the steps below.
1. Open the Control Panel and click Appearance and Themes.
2. Click Display.
3. Select the Settings tab and click Advanced button.
TECRA M2
Click start and click Control Panel.
Double-click the Display icon to open the Display Properties window.
Click the Settings tab and click the Advanced button.
Click the GeForce FX Go5200 32M/64M tab, click Device Settings
and click Select Output Device.
Select Advanced and select TV in the Device Selection window.
Select the Format box and select the format that your TV supports.
Optional Devices
8-18