Using The Usb Floppy Disk Drive (Optional) - Toshiba TECRA M2 User Manual

Replacing the cap
The AccuPoint cap is an expendable item that should be replaced after
prolonged use.
1. To remove the AccuPoint cap, firmly pinch the cap and pull it straight up.
2. Position a new cap on the peg and press it into place.
The peg is square, so be careful to align the cap's square hole with the peg.

Using the USB floppy disk drive (optional)

An optional 3 1/2" floppy disk drive connects to the computer's USB port.
It accommodates 1.44-megabyte or 720-kilobyte diskettes. Refer to
Chapter 2, The Grand Tour, for more information.
Connecting 3 1/2" floppy disk drive
To connect the drive, plug the floppy disk drive connector into a USB port.
Refer to figure below.
Make sure the connector is right side up and properly aligned with the
socket. Do not try to force the connection; doing so can damage the
connecting pins.
TECRA M2
Removing the AccuPoint cap
Connecting the USB floppy disk drive
Operating Basics
4-3