External Monitor; Security Lock - Toshiba NB205 Series User Manual

External monitor

An external analog monitor can be connected to the computer's external
monitor port, with the computer supporting WSVGA video mode. In order to
connect a monitor, follow the steps as detailed below:
1. Connect the monitor cable to the external monitor port and tighten the
screws on the left and right hand side of the connector as required.
1. External Monitor port
2. Monitor cable
2. Turn the external monitor's power on.
When you turn on the power, the computer will automatically recognize the
monitor and determine whether it is a color or monochrome device. In the
event that you find that there are issues getting an image displayed on the
correct monitor, you should consider using the FN + F5 hot key to change
the display settings (if you then disconnect the external monitor before you
turn the computer's power off, be sure to press FN + F5 hot key again to
switch to the internal display).
Please refer to Chapter 5,
keys to change the display setting.
The hibernation and standby feature can be used with an external monitor.
Simply enable hibernation and standby and the computer will maintain the
data as it is displayed on the external monitor.

Security lock

A security locks enable you to anchor your computer to a desk or other
heavy object in order to help prevent unauthorized removal or theft. The
computer has a security lock slot on its right side into which you can attach
one end of the security cable, while the other end attaches to a desk or
similar object. The methods used for attaching security cables differ from
product to product. Please refer to the instructions for the product you are
using for more information.
User's Manual
2
Figure 8-4 Connecting the monitor cable to the external monitor port
1
The Keyboard, for further details on using hot
Optional Devices
8-8