Installing The Hdd Pack - Toshiba TECRA M2 User Manual

8. Lift the HDD pack and remove it.

Installing the HDD pack

To install the hard disk drive, follow the steps below.
1. Place the HDD into the space for HDD. Slide the HDD to connect to the
connector.
2. Fold over the plastic tab so that it goes into the HDD space. Press the
HDD to ensure a firm connection.
3. Seat the cover and press down until the latches click into place.
4. Secure the cover with a screw.
TECRA M2
Removing the HDD pack
Installing the HDD pack
Optional Devices
8-14