Possible Faults; Possible Alarms - eka EKF 616 TC Original Operating And Instruction Manual

TECNOEKA Srl ___________________________________________________________ operating and instruction manual

10 Possible faults

Type of fault
Control panel totally off
(the oven does not work)
Cooking cycle set and
"START" key activated: the
oven does not work
Steam cycle activated: there
is no steam production in
the cooking chamber
Closed door: steam escapes
through the gasket
The oven does not cook
evenly

11 Possible alarms

Type of alarm
Temperature > 100°C
page 40 _____________________________________________________________________________________________
Cause of the fault
- Non conforming connection to the
power mains
- Mains voltage not present
- Electronic board protection fuse
(with microprocessor) blown
- Door open or ajar
- Magnetic sensor damaged
- Non conforming water mains
connection
- Closed stopcock
- Obstructed water inlet filter
- Damaged water inlet solenoid valve
- Non conforming gasket assembly
- Damaged gasket
- Loosened handle "nose"
- One of the motors is locked or
turns at low speed
- The motors do not reverse direction
Cause of the alarm
- Cooking chamber probe-
electronic board/microprocessor
connection interrupted.
- Damaged cooking chamber
probe.
- Core probe-electronic
board/microprocessor
connection interrupted.
- Damaged needle-shaped core
probe.
- Overheated motor (motor
thermal protection is triggered).
- Active safety thermostat
- The temperature in the cooking
chamber exceeds 100°C
- Check connection to the mains
- Restore power supply voltage
- Contact a skilled technician
- Close the door properly
- Contact a skilled technician
- Check connection to the water
mains
- Check the cock
- Clean the filter
- Contact a skilled technician
- Check gasket assembly
- Contact a skilled technician
- Contact a skilled technician
- Contact a skilled technician
- Contact a skilled technician
Effect
- Disabled oven
operation
- It is not possible to
activate a cooking
cycle which requires
to set the "core
temperature"
parameter
- Disabled oven
operation
- Disabled oven
operation
- The automatic
washing cycle cannot
be activated
Corrective action
Corrective action
- Contact a skilled
technician
- Contact a skilled
technician
- Contact a skilled
technician
- Contact a skilled
technician
-
Cool the cooking
chamber: open the door
and touch key
activate automatic
cooling.
to