Pro-Form Hybrid Trainer User Manual page 7

ASSEMBLV
• To hire an authorized service technician to
assemble the hybrid trainer, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materiais. Do not dispose of the packing
materiais until you finish assembly.
• Left parts are marked "L" or "Left" and right parts
are marked "R" or "Right."
• To identify small parts, see page 6.
1. Go to my.proform.com on your computer and
reglster your product.
• documents your ownership
• activates your warranty
• ensures priority customer support if assistance
is ever needed
Note: lf you do not have internet access, call
Customer Gare (see the front cover of this
manual) and registar your product.
2. With the help of a second person, place some
of the packing rr.aterials (not shown) under the
Frame (1 ).
Orient the Rear Stabilizer (6) so that the large
holes (A) are facing the Frame (1 ). Attach
the Rear Stabilizer to the Frame with two
M1 O x 80mm Screws (19).
Then, remove the packing materiais from under
the Frame (1 ).
7
• ln addition to the included tool(s), assembly
requires the following toais:
one Phillips screwdriver
one adjustable wrench
ª"'"Ô[--€:
one rubber mallet
~o
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power toais.