Organization; Conventions - Cisco 1552S Installation Manual

Organization

This guide contains the following sections:
Chapter
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Appendix A
Appendix B
Appendix C
Appendix D
Appendix E
Appendix F

Conventions

This publication uses the following conventions:
Convention
boldface font
italic font
[ ]
Cisco Aironet 1552 Series for Hazardous Locations Installation Guide
viii
Title
Overview
Before You Begin
Installing the 1552 Series
Access Points in Hazardous
Locations
Troubleshooting
Translated Safety Warnings
Declarations of Conformity
and Regulatory Information
Channels and Power Levels
Access Point Specifications
Access Point Pinouts
Configuring DHCP Option
43
Description
Commands, command options, and keywords are
in boldface.
Arguments for which you supply values are in
italics.
Elements in square brackets are optional.
Description
Describes the major components and features
of the access point.
Provides warnings, safety information, and
mounting information you need to install your
access point. The chapter contains a new
section that provides information and
procedures for mounting the access point in
Class I, Division 2/Zone 2 hazardous locations.
Describes the procedures for installing the
different models of the access point.
Provides basic troubleshooting procedures for
the access point.
Indicates how to access the document that
provides translations of the safety warnings
that appear in this publication.
Describes the regulatory conventions to which
the access point conforms and provides
guidelines for operating access points in Japan.
Indicates how to access the document that lists
the access point radio channels and the
maximum power levels supported by the world
regulatory domains.
Lists technical specifications for the access
point.
Describes the connector pinouts for the access
point.
Describes the procedure to configure DHCP
Option 43.
Preface