Cisco 1552S Installation Manual page 80

Installation Details for the 1552SA and 1552SD Access Point
Figure 3-15
1
Reel bracket
3
Two fiber reels
5
1/2-NPT port adapter from the kit.
Do not use in hazardous location
deployments.
Fiber and power can both be routed through the AC/DC port. If fiber and power are coming from the
Note
same area externally, route both through the AC/DC port. If fiber and power are coming from different
areas externally, route them through one of the recommended junction boxes.
The rest of this procedure will show routing through an ETRT50 junction box.
Cisco Aironet 1552 Series for Hazardous Locations Installation Guide
3-66
Fiber-Optic Cable Kit Components (1552SD shown)
4
3
3
1
Chapter 3 Installing the 1552 Series Access Points in Hazardous Locations
4
2
6
2
Two screws for attaching reel bracket to AP
(#4-40 x .25 in)
4
Eight screws, four to attach each reel to
bracket (#2-56 x .31 in)
6
SFP module slot
5