Honeywell SmartVFD HVAC MR4 User Manual page 79

Honeywell
• 7
2. G
RAPHIC KEYPAD
The control keypad is the interface between the drive and the user. It features an LCD display
and 9 buttons.
With the control keypad it is possible to control the speed of a motor, to supervise the state of
the equipment and to set the frequency converter's parameters.
2.1 Keypad buttons
Move backward in menu
Exit edit mode
Reset faults with long press
Move cursor left
Stop button
OK
Figure 1. Keypad buttons
2.2 Keypad display
The keypad display indicates the status of the motor and the drive and any irregularities in mo-
tor or drive functions. On the display, the user sees information about his present location in the
menu structure and the item displayed.
2.2.1 Main menu
The data on the control keypad are arranged in menus and submenus. Use the Up and Down
arrows to move between the menus. Enter the group/item by pressing the OK button and return
to the former level by pressing the Back/Reset button. See Figure 1.
The Location field indicates your current location. The
present status of the drive.
-
INTRODUCTION
Scroll menu up
Increase value
Scroll menu down
Decrease value
Enter active level/item
Confirm selection
G
RAPHIC KEYPAD
Change control place
Move cursor right
Start button
Status field gives information about the
-
INTRODUCTION