Honeywell SmartVFD HVAC MR4 User Manual page 77

Honeywell
• 5
14
Wake-up level 1
1.3 Multi-pump mini-wizard
The Multi-Pump mini-wizard asks the most important questions for setting up a Multi-Pump sys-
tem. The PID mini-wizard always precedes the Multi-Pump mini-wizard. The keypad will guide
you through the questions as in chapter 1.2 then to be followed by the set of questions below:
15
Number of motors
16
Interlock function
17
Autochange
If Autochange function is enabled the following three questions will appear. If Autochange will
not be used the Wizard jumps directly to question 21.
18
Include FC
19
Autochange interval
20
Autochange: Frequency limit
21
Bandwidth
22
Bandwidth delay
After this, the keypad will show the digital input and relay output configuration recommended
by the application. Write these values down for future reference.
Range depends on selected pro-
cess unit.
1...4
0 = Not used
1 = Enabled
0 = Disabled
1 = Enabled
0 = Disabled
1 = Enabled
0.0...3000.0 h
0.00...50.00 Hz
0...100%
0...3600 s
S
TARTUP