P
OWER CABLING
MR9 only: Now re-mount the main cover (unless you want to make the control
12
connections first).
Check the connection of the earth cable to the motor and the AC drive terminals
marked with
NOTE: Two protective conductors are required according to standard EN61800-
13
5-1. See chapter Grounding and ground fault protection.
Connect the protective conductor using a cable shoe and an M8 screw (included
Accessories bag
in the
Figure 40.
Figure 39.
.
) on either of the screw connectors as advised in
Honeywell
• 38
4