Table of Contents
Advertisement
14 •
750-641 [DALI/DSI Master Module]
Process Data
Standards and Regulations *
EMC Immunity to interference (CE)
EMC Emission to interference (CE)
EMC Immunity to interference
(ship building)
EMC Emission to interference
(ship building)
Approvals *
*
More Information
Detailed references to the approvals are listed in the document "Overview
Approvals WAGO-I/O-SYSTEM 750", which you can find on the CD ROM
"AUTOMATION Tools and Docs" (Item-No.: 0888-0412)
or in the internet under:
WAGO-I/O-SYSTEM 750 System Description
2.1.1.6 Process Data
Six data bytes are allocated in the process image of the coupler/controller by
the DALI/DSI Master Module in the input and output area.
The transfer of the data to be delivered and received takes place in 5 input and
5 output bytes.
The additional control and status byte of the module is used to perform the
data transfer on the internal data bus.
The data of the individual electronic ballasts or sensors are not mapped in the
process image of the connected coupler/controller, but tunneled via the DALI
commands to the application level to be analysed and processed.
Depending whether the module is operated in a fieldbus node using a PFC or a
coupler with higher-level control, different detailed information will be
required for accessing and analysing the process data.
)
(See Chapter 2.2 of Coupler/Controller Manual)
UL
(UL508)
C
US
UL
(ANSI/ISA 12.12.01)
C
US
DEMKO / IEC
Conformity Marking
)
Attention!
For the guarantee of the standards and approvals for ship employment, the
DALI/DSI Master Module 750-641 must be used in bundle with the DC/DC
converter 288-895!
)
(See Chapter 2.2 of Coupler/Controller Manual)
acc. to EN 61000-6-2 (01)
acc. to EN 61000-6-3 (01)
acc. to Germanischer Lloyd (97)
acc. to Germanischer Lloyd (97)
http://www.wago.com
(requested)
Class I Div2 ABCD T4
I M2 / II 3 G/D Ex nA IIC T4
Documentation
WAGO-I/O-SYSTEM 750
I/O Modules
Advertisement
Table of Contents
