Table of Contents
Advertisement
2.1.1.6.1 Implementing a PFC (Programming Fieldbus Controller)
IEC 61131-3 function blocks for WAGO-I/O-PRO are available so that the
process data can be read out using the controller.
These functions blocks allow for both the Dali commands specified in the
standard DIN IEC 60929 and the extended commands to be transmitted and
executed.
Further information
Preprogrammed function blocks can be downloaded free of charge from the
Internet when implementing the DALI/DSI Master Module together with the
IEC 61131-3 programming tool WAGO-I/O-PRO.
These can be found at: www.wagotoplon.com.
WAGO-I/O-SYSTEM 750
I/O Modules
750-641 [DALI/DSI Master Module]
Process Data
• 15
Advertisement
Table of Contents
