Display Elements - WAGO I/O SYSTEM 750 750-641 Manual

Fieldbus independent i/o modules dali/dsi master module
Table of Contents

Advertisement

12 •
750-641 [DALI/DSI Master Module]

Display Elements

WAGO-I/O-PRO programming tool or in a higher-level control when a
connected fieldbus coupler is used.
The data of the individual electronic ballasts or sensors are not mapped in the
process image of the connected coupler/controller, but tunneled to the
application programm so the data can be analysed and processed via the
commands.
LEDs indicate the operating condition of the module and the trouble-free
internal data bus communication as well as the state of both the signal
transmission and the DALI bus.
Any Modules can be placed in any configuration when designing the fieldbus
node. Grouping of module types is not necessary.
Attention
This module has no power contacts. For field supply to downstream I/O
modules, a supply module will be needed.
Attention
The DALI/DSI Master Module cannot be used in the following combination:
LonWorks® Fieldbus Coupler 750-319 together with the WAGO TOPLON®
IF and PRIO Plug-Ins.
The module is directly supported by the controllers of the
WAGO-I/O-SYSTEM 750.
A higher-level control must be used to control the module when a coupler is
used.
This module can be used with all couplers/controllers (except for the economy
variations 750-320, -323, -324 and -327) of the WAGO-I/O-SYSTEM 750.
2.1.1.3 Display Elements
13 14
A
A
C
B
B
D
Fig. 2.1.1-2: Display
elements
g041402xx
LED Designation
A
Function
B
TxD
C
D
C
U_DALI
D
RxD
State
Function
no operational readiness or the internal data
off
bus communication is interrupted/disturbed
operational readiness and trouble-free internal
green
data bus communication
off
no TxD signal transmission or DSI mode
green
signal transmission TxD available
flashing DALI mode (cyclical flashing, 1x per sec.)
no 18 V supply available or Dali bus cable
off
break/short circuit or self-test failure
18 V supply available and no DALI bus failure
green
as well as trouble-free self-test
off
no RxD signal transmission
green
RxD signal transmission available
WAGO-I/O-SYSTEM 750
I/O Modules

Advertisement

Table of Contents
loading

This manual is also suitable for:

I/o system 750750-641

Table of Contents