Column - Vinten Vision Ped Plus Maintenance Manual

Contents
(13)
(14)

Column

3 Install the column on the skid as follows:
3.1 Fully slacken the skid clamp
to the outside of the foot supports.
3.2 Ensure the control valve
3.3 Release the Velcro retaining strap
3.4 Hold the telescopic column upright with the steering ring
struts up almost to horizontal.
3.5 Lift the column assembly by the steering ring and lower it vertically into the skid centre casting
(12). Engage the struts on the foot supports (7).
Fig 2.1 Assembling the skid
(11) and ensure that the rubber straps
(2) is set to the WORK position.
(6) holding the three struts (17).
First Previous
Page Page
(13.1)
(7) on each foot support are
(20) uppermost and swing the three
Next Previous
Page View
17