Vinten Vision Ped Plus Maintenance Manual page 21

Contents
9.6 Grip the handle
the required pressure. Do not exceed the maximum working pressure, indicated by the leading edge of
the red sector on the gauge (3).
9.7 Disconnect the hose
valve cap at this stage. Fit the hose in its stowage (P.2).
9.8 Push the pump plunger fully down, push in the handle release button
(P.1) to the vertical position, where it will lock the pump plunger in the closed position.
9.9 Fold up both the feet (P.3).
(P.5)
(P.4)
(P.1) with both hands and, using full steady strokes, pressurize the pedestal to
(P.4) from the pedestal charging valve (4), but do not refit the Schrader
Fig 2.3 The Vinten portable pump
First Previous Next
Page Page Page
(P.5) and move the handle
Previous
View
(P.1)
(P.2)
(P.3)
21