Contents
NOTE:
Certain consumable materials are required for procedures detailed in this Section. Please
refer to Tools and Materials (Page 25). For further details, please contact Vinten Broadcast
Ltd or your local distributor.
Disassembly
Column
Separating the telescopic column and skid
3
Remove the column from the skid as follows:
3.1
Lower the top stage and engage the safety catch.
3.2
Lower the elevation tube as far as possible.
3.3
Tighten the bottom clamp.
3.4
Remove the load.
3.5
Release the skid clamp and the rubber securing straps. Lift the struts clear of the foot supports.
3.6
Use the steering ring to lift the telescopic column vertically until it is clear of the skid assembly,
then secure the struts with the retaining strap (6).
WARNING!: The column will be unstable if stood on its base.
First
Previous
Next
Page
Page
Page
Previous
View
33