Contents
First
Previous
Next
Previous
Page
Page
Page
View
17
To assemble the castors
(Fig
6.5):
17.1 Unscrew knob (7) and remove screw (17) and two washers (6).
17.2 Slide cable guard (16) on to castor (18). Replace screw (17), two washers (6) and knob (7).
17.3 Degrease thread on castor assembly (19).
17.4 Fit assembled wheel lock housing (15) to castor assembly and secure to leg with slotted nut (24).
Ensure that dowel pin (14) engages in hole in leg tube. Use tool 3319-900SP, or a suitable peg spanner,
but do not tighten nut (24) at this stage.
17.5 Align wheels
(see page
31).
17.6 Install foot support (25) and secure with two screws (13).
17.7 Fit leg retaining strap (26).
38