Table of Contents
Advertisement
Other settings
●Peak/Bottom value indication
The maximum (minimum) flow from when the power is supplied to this moment is detected and updated.
In the peak/bottom indication mode, the flow is indicated.
As the peak indication, when the
flashing and is held.
To release holding the indication of the maximum flow, press the
The measurement mode is returned.
As the bottom indication, when the
flashing and is held.
To release holding the indication of the minimum flow, press
The measurement mode is returned.
If the
and
the maximum (minimum) value is initialized.
●Zero Clear
A displayed value can be adjusted to zero when flow rate to be measured is within ±10% F.S. of the flow
rate at the time of shipment from the factory.
(The range of ±1 digit setting is different depending on the individual product difference)
Press continuously the
Return to the measurement mode automatically. Accumulated value is zero when accumulated flow is
displayed.
button is pressed for 1 second or longer, the maximum flow starts
button is pressed for 1 second or longer, the minimum flow starts
buttons are pressed simultaneously for 1 second or longer while the flow is being held,
and
buttons for 1 second more simultaneously, display is cleared as "0".
button for 1 second or longer again.
the button for 1 second or longer again.
-46-
No.PF##-OMJ0018
Advertisement
Table of Contents
