<How to perform>
∗: The flow monitor will also output during setting.
1. Press the
button once in the measurement mode.
[LLL] is displayed during measurement mode when the sensor is not connected.
2. [P_1] or [n_1] and set value are displayed by turn.
3. Press
the or
The
button is for increase and the
•Press the
button once to increase by one figure and press it continuously to keep set figure
increased.
•Press the
button once to decrease by one figure and press it continuously to keep set figure
decreased.
button to change the set value.
button is for decrease.
-22-
No.PF##-OMJ0018