SMC Networks PPA Series Manual

SMC Networks PPA Series Manual

Compact manometer
Hide thumbs Also See for PPA Series:

Advertisement

Quick Links

CAT.E 826-
Compact Manometer
PPA
Series
A pressure measuring instrument with exceptional portability.
A pressure measuring instrument with exceptional portability.

Advertisement

Table of Contents
loading

Summary of Contents for SMC Networks PPA Series

  • Page 1 CAT.E 826- Compact Manometer Series A pressure measuring instrument with exceptional portability. A pressure measuring instrument with exceptional portability.
  • Page 2: Compact And Light Weight

    Pressure measurements can easily Compact and light weight Portable type with a light weight of only about 100g (unit 50g, battery 50g) can also be held in the palm of the hand. Measurement unit switching for global use Freely selectable measurement display and easy unit conversions also make it ideal for the SI unit transition period.
  • Page 3: Application Examples

    be taken any time, anywhere. Application examples Confirmation of Confirmation of air line source pressure regulator set pressure Human reading error is eliminated by Setting of a regulator can be the ability to confirm line pressure on performed more precisely than with a the digital display.
  • Page 4: How To Order

    Series Compact Manometer PPA100 ⋅101 ⋅102 How to Order PPA10 Pressure specification Option/Case holder – 0.1 to 1MPa(for high pressure) Without case – 101 to 10kPa(for vacuum) With PPA-B – 10 to 100kPa(for low pressure) One-touch fitting type Symbol Applicable tube size One-touch fitting Applicable tube material Nylon...
  • Page 5: Operation And Functions

    Series Compact Manometer Description of Operating Parts Operation and Functions (PPA100 shown. Units: MPa) Initial Setting Be certain to perform initial setting when using for the first time and after changing batteries, as the unit will indicate memory data error. 1.
  • Page 6 Series Operation and Functions (PPA100 shown. Unit: MPa) Peak/Bottom Display Unit Display Switching 1. Press and hold the 1. When pressed continuosly Note) Since this is combined with power OFF POWER LIGHT for 3 seconds or more, the operation, the button should be released at the buttons for 3 seconds point when "P"...
  • Page 7 Series Compact Manometer Dimensions Scale: Connecting tube port Accessory One-touch fitting PPA100 LOCK MODE(AUTO POWER OFF CANCEL) POWER LIGHT BATTERY 1.5Vx2 LR6,R6P MADE IN JAPAN POWER LIGHT Body Span calibration – – Type AA dry batteries (2 pcs.) Note) Dimension X includes the One-touch fitting.
  • Page 8: Maintenance

    Series Error Correction Maintenance When errors occur, they should be corrected as shown below. • Span calibration method Caution Display Nature of error Corrective action Do not touch the span calibration trimmer except when performing span calibration. Pressure being applied is Operate within the rated 1.
  • Page 9: Safety Instructions

    Series Safety Instructions These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by label of "Caution", "Warning" or "Danger". To ensure safety, be sure to observe ISO 4414 Note 1) , JIS B 8370 Note 2) and other safety practices.
  • Page 10 Series Specific Product Precautions Be sure to read before handling. See page 6 for safety precautions. Operating Environment Handling Precautions Warning Warning 1. Absolutely do not use in an atmosphere of 1. The compact manometer can be used for explosive gases. measurement of air and non-corrosive gases.

This manual is also suitable for:

Ppa100Ppa101Ppa102

Table of Contents