Table of Contents
Advertisement
■[F 9] Set auto preset
This function is capable of calculating the specified set value automatically based on the on-going
operation.
<Operation>
Press the
or
Set auto preset
[PrS] and set value are displayed by turn.
Press the
or
Press the
Press the button during measurement mode to display [APH].
([APW] in case of window comparator mode)
Press the button again, and change the flow rate while the display is flashing.
Set value is automatically calculated by pressing the button. The mode is changed to measurement mode.
Once setting is performed, auto preset mode is turned off. It becomes possible to confirm the set value by
pressing the button and perform fine adjustment of set value.
button at function selection mode to display [F 9].
Press the
button.
button to select auto preset.
button to set
Setting of [F 9] Auto preset completed
Move on to set auto preset.
Return to function selection mode
-38-
No.PF##-OMJ0018
Advertisement
Table of Contents
