Table of Contents
Advertisement
Table below shows the example of the flow display when auto-shift zero is selected.
Here, takes normal condition as an example.
•Operation example: Flow display before/after auto-shift zero at normal condition
Before auto-shift
Input auto-shift at 2.6
After auto-shift
*: As for the flow on the negative side, the leftmost decimal point is blinked to show that it is a "-" value.
Set flow range when auto-shift or auto-shift zero is selected is as follows.
•Set flow range when auto-shift or auto-shift zero is selected
Model No.
Set flow range
-10.5 to 10.5 L/min
■[F 8] Select display resolution
Available for PFM511, 510 series.
Flow increment display for PFM511 series is by 1 L/min, 0.1 L/min. for PFM510 series.
∗: When the series other than PFM511, 510 series are used, [---] is indicated and this function setting is not available.
<Operation>
Press the
or
Select display resolution
[drE] and set value are displayed by turn.
Press the
or
Press the
Flow display [L/min]
0
1.0
↓
↓
∗
∗
.2.6
.1.6
PFM510
PFM525
-26.3 to 26.3 L/min
button at function selection mode to display [F 8].
button .
Press the
button to select display resolution.
button to set.
Setting of [F 8] Display resolution completed
⋅⋅⋅
2.6
3.0
↓
↓
⋅⋅⋅
0
0.4
PFM550
-52.5 to 52.5 L/min
Move on to select display resolution.
Return to function selection mode.
-37-
8.0
9.0
10.0
↓
↓
↓
5.4
6.4
7.4
PFM511
-105 to 105 L/min
No.PF##-OMJ0018
Advertisement
Table of Contents
