Sws441/Sws641 Control Set - Becker M Installation Manual

SWS441/SWS641 control set

Commissioning the SWS441/SWS641 radio-controlled
Sun-Wind-Set hand-held transmitter with sensor
1. Programming the master
transmitter
Switch off the power supply on the
radio receiver (drive type PSF(+))
and then switch it back on
the programming button on the
master transmitter
clicks twice .
Note: Follow the instructions on
pages 92 and 93 to set the limit
positions for the PSF(+) drive.
2. Programming the SC811/
SC861
a) Press the programming button of
the master transmitter
tubular drive clicks once
b) Then press the programming
button of the SC811/SC861
until the tubular drive clicks once
.
c) Press the programming button of
the SC811/SC861 again
the tubular drive clicks twice
. Press
until the drive
until the
.
until
.
142
2x click
1x click
1x click
2x click