Programmable Functions; Choosing And Selecting A Programmable Function - Miele WSD 323 Selection Operating Instructions Manual

Programmable functions

The programmable functions are used
to alter the machine's electronics to
suit changing requirements. Program-
mable functions can be altered at any
time.
The programming is carried out in eight
steps (, ,  ... ) using the sensor
controls.
Accessing the programming level
Pre-requisites:
– The washing machine is switched on
(the programme selector is pointing
to a wash programme).
– The washing machine door is open.
 Touch the Start/Add laundry sensor
and leave your finger on it whilst car-
rying out steps -.
 Close the washing machine door.
Wait until the Start/Add laundry sensor
lights up constantly ...
 ... and then take your finger off the
Start/Add laundry sensor.
After approx. four seconds,  will light
up in the time display.
74
Choosing and selecting a pro-
grammable function
The number of the programmable
function will appear in the time display
as  and a number: e.g. .
 Touch the  or  sensor to scroll to
the next or previous programmable
function:
Programmable functions

Keypad tone

Lock code
 Control panel standby status
 Memory
 Additional pre-wash time - Cot-
tons
 Gentle action
 Reduced temperature
 Water plus

Water plus level

Maximum rinse level

Suds cooling
 Anti-crease
 Backlight brightness
 Confirm the selected programmable
function by pressing the Start/Add
laundry sensor.