Download Print this page

Hygiene Info(Cleaning The Drum); Cleaning The Water Inlet Filter - Miele WSD 323 Selection Operating Instructions Manual

Hide thumbs

Advertisement

Hygiene info
(Cleaning the drum)
Washing at low temperatures and/or us-
ing liquid detergent can cause bacteria
and unpleasant odours to build up in
the washing machine. Use the Cot-
tons 90 °C programme to clean the
washing machine. Clean the drum when
the indicator light  comes on at the
latest.

Cleaning the water inlet filter

The washing machine has 2 filters to
protect the inlet valve. Check these fil-
ters every 6 months or so. Perform this
check more often if there are frequent
interruptions to the external water sup-
ply.
Cleaning the filter in the inlet hose
 First turn off the stopcock.
 Unscrew the inlet hose from the stop-
cock.
 Remove the rubber seal 1 from the
recess.
 Using pointed pliers, take hold of the
plastic filter slat 2 and remove the
plastic filter.
Cleaning and care
 Clean the filter.
 Reassemble in reverse order.
Cleaning the filter in the inlet valve
 Using pliers, carefully loosen the
ribbed plastic nut on the inlet valve
and unscrew it.
 Use pointed pliers to withdraw the
plastic filter by the slat.
 Clean the filter.
 Reassemble in reverse order.
The two filters must be put back in
place after cleaning.
 Screw the screw connection securely
back onto the stopcock.
 Open the stopcock.
Make sure there is no water leaking
from the threaded union.
Tighten the threaded union.
47

Hide quick links:

Advertisement

loading