Table of Contents
Advertisement
Programmable functions
The programmable functions are used
to alter the machine's electronics to
suit changing requirements.
Programmable functions can be
altered at any time.
Programming is carried out in 8 steps
(, , ... ) using the sensor
buttons.
Accessing the programming level
Before you begin, ensure the following:
- The washing machine is switched on
(the program selector is pointing to a
wash program).
- The washing machine door is open.
Touch the Start/Stop sensor button
and hold it down during steps –.
Close the washing machine door.
Wait until the Start/Stop sensor button
lights up constantly...
...and then release the Start/Stop
sensor button.
After approximately 4 seconds, will
light up on the time display.
Choosing and selecting
programmable functions
The number of the programmable
function will appear on the display as
and a number: e.g., .
Touch the or sensor button to
scroll to the next or previous
programmable function:
74
Programmable functions
Buzzer
Keypad tone
PIN code
Control field switch-off status
Memory
Water inlet
Gentle action
Reduce temperature
Maximum rinse level
Suds cooling
Anti-crease
Low water pressure
Chlorine bleach
Display brightness dimmed
Welcome tone volume
Remote control
SmartGrid
RemoteUpdate
Confirm the selected programmable
function by touching the Start/Add
laundry sensor button.
Advertisement
Table of Contents
