Download Print this page

Re-Fitting The Transit Bars - Miele WSD 323 Selection Operating Instructions Manual

Hide thumbs

Advertisement

Table of Contents
Installation
Risk of injury from sharp edges.
There is a risk of injury from reaching
into holes that are not covered.
Cover the holes for the transit bars
after they have been removed.
 Fit the stoppers onto the two holes.
62
 Secure the transit bars to the back of
the washing machine. Make sure that
the top catch is located above the
holder.
Risk of damage from incorrect
transport.
The washing machine may become
damaged if moved without the transit
bars in place.
Keep the transit bars in a safe place.
Fit them again if the machine is to be
moved (e.g. when moving house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the
procedure.

Hide quick links:

Advertisement

Table of Contents
loading