Download Print this page

Miele WSD 323 Selection Operating Instructions Manual page 52

Hide thumbs


Problem solving guide
General problems with the washing machine
Fabric conditioner is not
completely dispensed
or too much water re-
mains in the  com-
At the end of the pro-
gramme there is still li-
quid in the capsule.
There is water next to
the capsule in the fabric
conditioner compart-
Cause and remedy
The siphon tube is not correctly positioned or is
 Clean the siphon, see "Cleaning and care - Clean-
ing the detergent dispenser drawer".
The small pipe in the detergent dispenser drawer
onto which the capsule is placed is blocked.
 Clean the small pipe.
This is not a fault.
For technical reasons a small amount of water will
remain in the capsule.
The  sensor control was not activated.
 Make sure that you remember to activate the
 sensor control the next time you insert a cap-
An empty capsule was not removed at the end of the
last wash programme.
 Remove and dispose of the empty capsule at the
end of each programme.
There is a blockage in the small pipe in the detergent
drawer onto which the capsule is placed.
 Clean the small pipe.

Hide quick links: