The programmable functions are used
to alter the machine's electronics to
suit changing requirements.
Programmable functions can be
altered at any time.
Opening the programming
level
Programming is carried out in 8 steps
(, , ... ) using the sensors.
Before you begin, ensure the following:
- The washing machine is switched on
(the programme selector is pointing
to a wash programme).
- The washing machine door is open.
Touch the Start/Add laundry sensor
and hold it down while carrying out
steps and .
Close the washing machine door.
Wait until the Start/Add laundry sensor
lights up constantly ...
... and then release the Start/Add
laundry sensor.
After approx. four seconds, will light
up in the time display.
Programmable functions
Choosing and selecting
programmable functions
The number of the programmable
function will appear in the display as
and a number: e.g. .
Touch the or sensor to scroll to
the next or previous programmable
function:
Programmable functions
Buzzer
Keypad tone
PIN Code
Control panel switch-off status
Memory
Longer pre-wash Cottons
Gentle action
Reduce temperature
Water plus
Water plus level
Maximum rinse level
Suds cooling
Anti-crease
Low water pressure
Backlight brightness dimmed
Remote control
SmartGrid
RemoteUpdate
Confirm the selected programmable
function by touching the Start/Add
laundry sensor.
75