Download Print this page

During The Programme, A Symbol Appears In The Time Display; At The End Of The Programme, An Indicator Light Lights Up In The Control Panel - Miele WSD 323 Selection Operating Instructions Manual

Hide thumbs


Problem solving guide

During the programme, a symbol appears in the time display

 lights up
At the end of the programme, an indicator light lights up in the
control panel
The indicator light 
lights up.
The indicator light 
lights up.
 and  appear altern-
ately on the time dis-
Cause and remedy
The programme selector was moved to a different
position after the programme had started.
 Turn the programme selector back to the original
Cause and remedy
Excessive foam has built up during washing.
 Use less detergent next time, and follow the man-
ufacturer's recommended dosage amounts on the
When washing, a wash programme using a temperat-
ure above 60 °C has not been run for a long time.
 Run the Cottons 90 °C programme using Miele
machine cleaner or a universal powder detergent.
This will clean the washing machine and prevent a
build-up of bacteria and odours.
The Pre-ironing extra which runs at the end of the
programme could not be carried out properly.
 Check whether the washing machine is aligned
correctly (see "Installation – Levelling the ma-
 Check whether the maximum drainage head
height of 1 m has been exceeded.
If the fault message appears again, contact the Miele
Customer Service Department. The washing machine
can still be used, but without the Pre-ironing extra.

Hide quick links:



  Related Content for Miele WSD 323 Selection