Table of Contents
Advertisement
BDM Connector Information
The USB TAP for BDM has a 26-pin connector. The CodeWarrior USB TAP for BDM
automatically supports target signal levels from 1.8V to 3.3V.
Figure C.1
shows the pin assignments of the CodeWarrior USB TAP for BDM connector.
Table C.1
lists BDM signal names, direction, pin numbers, descriptions, and drive
capabilities for the USB TAP BDM Connector.
Table C.2
provides a general description of each BDM signal and the USB TAP for BDM
operational requirements.
NOTE
All BDM signals must meet accepted standards for BDM signal design. To
ensure proper and stable operation between the USB TAP for BDM emulator
and the target, the BDM signals must meet the requirements listed in
C.2.
USB TAP Users Guide
C
Table
31
Advertisement
Table of Contents
