Sfc 234 - Reset - Reset Page Frame - YASKAWA VIPA SPEED7 Operation Manual

VIPA SPEED7
16.1.7

SFC 234 - RESET - Reset page frame

Description
Parameters
Name
SSNR
ANR
PAFE
Operating modes
HB00 | OPL_SP7 | Operation list | en | 18-30
The RESET ALL function is called via the order number 0. This resets all orders of this
logical interface, e.g. deletes all order data and interrupts all active orders. With a direct
function (ANR ¹ 0) only the specified order will be reset on the logical interface. The block
depends on the RLO and may be called from cyclic, time or alarm controlled program
parts.
Declaration Type
IN INT
IN INT
OUT BYTE
The block has two different operating modes:
n RESET ALL
n RESET DIRECT
Fetch/Write Communication > SFC 234 - RESET - Reset page frame
Description
Interface number
Job number
Parameterization error
System Blocks
901