Table of Contents
Advertisement
VIPA SPEED7
Configuration of Ethernet
PG/OP channel
Enable PtP functionality
13.5.5.3
User program
13.5.5.3.1
Program structure
OB 100
HB00 | OPL_SP7 | Operation list | en | 18-30
Usage inverter drive via Modbus RTU > Usage in Siemens SIMATIC Manager
8.
Navigate in the hardware catalog to the directory 'PROFINET IO
è Additional field devices è I/O è VIPA ...' and connect the IO device, which cor-
responds to your CPU, to your PROFINET system.
ð In the slot overview of the PROFINET IO device 'VIPA SLIO CPU' the CPU is
already placed at slot 0. From slot 1 you can place your System SLIO modules.
1.
Place for the Ethernet PG/OP channel at slot 4 the Siemens CP 343-1 (SIMATIC
300 \ CP 300 \ Industrial Ethernet \CP 343-1 \ 6GK7 343-1EX30 0XE0 V3.0).
2.
Open the properties dialog by clicking on the CP 343-1EX30 and enter for the CP at
'Properties' the IP address data. You get valid IP address parameters from your
system administrator.
3.
Assign the CP to a 'Subnet' . The IP address data are not accepted without assign-
ment!
For the System SLIO CPUs 014 ... 017, the RS485 interface is set to PtP communication
as standard. A hardware configuration to enable the PtP functionality is not necessary.
n
FB 876 - VMC_ConfigMaster_RTU
–
This block is used to parametrize the serial interface of the CPU for Modbus RTU
communication.
–
Internally block SFC 216 - SER_CFG is called.
Motion control - Simple Motion Control Library
Ä 504
477
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
