Debugging Messages - CipherLab 8 Series User Manual

CipherLab BASIC Programming

DEBUGGING MESSAGES

Debugging messages indicate the activities happening on the system. The common
debugging messages are listed as follows.
Message
ABS(N)
ADD(N1%,N2%)
ADD_RECORD(file%,data$)
ALPHA_LOCK(status%)
AND
ARY(N%)
ASC(X$)
ASGN(A)
AUTO_OFF(N%)
BACK_LIGHT_DURATION(N%)
BACKLIT(state%)
BACKUP_BATTERY
BEEP(...)
BIT_OPERATOR(...)
BT_INQUIRY$
BT_PAIRING(addr$,type%)
CHANGE_SPEED(N%)
CHR$(N%)
CIRCLE(...)
CLOSE_COM(N%)
CLR_KBD
CLR_RECT(...)
CLS
CODE_TYPE
COM_DELIMITER(N%,C%)
CURSORX
CURSORY
DATE$
234
Part I
Explanation
Indicating the command ABS is processed.
Indicating an addition is processed.
Indicating the command ADD_RECORD is processed.
Indicating the command ALPHA_LOCK is processed.
Indicating the logical operation AND is processed.
Indicating an N-element array is declared.
Indicating the command ASC is processed.
Indicating that the value A is assigned to the variable. A could
be an integer, long integer, character, string, or any type.
Indicating the command AUTO_OFF is processed. N% is the
assigned time interval.
Indicating the command BACK_LIGHT_DURATION is processed.
N% is the assigned time interval.
Indicating the command BACKLIT is processed.
Indicating the command BACKUP_BATTERY is processed.
Indicating the command BEEP is processed.
Indicating the command BIT_OPERATOR is processed.
Indicating the command BT_INQUIRY$ is processed.
Indicating the command BT_PAIRING is processed.
Indicating the command CHANGE_SPEED is processed. N% is
the selection of the speed.
Indicating the command CHR is processed.
Indicating the command CIRCLE is processed.
Indicating the command CLOSE_COM is processed. N% is the
number of the COM port.
Indicating the command CLR_KBD is processed.
Indicating the command CLR_RECT is processed.
Indicating the command CLS is processed.
Indicating the command CODE_TYPE is processed.
Indicating the command COM_DELIMITER is processed.
Indicating the command CURSOR_X is processed.
Indicating the command CURSOR_Y is processed.
Indicating the system date is inquired.