Code 39 - CipherLab 8 Series User Manual

CipherLab BASIC Programming
33 1: Transmit Matrix 25 Check Digit
0: DO NOT transmit Matrix 25 Check Digit
36 Select Matrix 25 Start/Stop Pattern
2: Use Matrix 25 Start/Stop Pattern
1: Use Interleaved 25 Start/Stop Pattern
0: Use Industrial 25 Start/Stop Pattern
64 1: Matrix 25 Code Length Limitation in Max/Min Length
Format
0: Matrix 25 Code Length Limitation in Fixed Length Format
65 Matrix 25 Max Code Length / Fixed Length 1
66 Matrix 25 Min Code Length / Fixed Length 2
COOP 25
Currently, the support of Coop 25 is implemented on 8000, 8200, 8300, 8400 and 8700.
No. (N1%) Values (N2%) & Description
21 1: Enable Coop 25
0: Disable Coop 25
171 1: Verify Coop 25 Check Digit
0: DO NOT verify Coop 25 Check Digit
172 1: Transmit Coop 25 Check Digit
0: DO NOT transmit Coop 25 Check Digit
Verify Check Digit
Decide whether or not to perform check digit verification when decoding barcodes.
 If true and the check digit found incorrect, the barcode will not be accepted.
Note: "Verify Check Digit" must be enabled so that the check digit can be left out when it
is preferred not to transmit the check digit.
Transmit Check Digit
Decide whether or not to include the check digit in the data being transmitted.

CODE 39

No. (N1%) Values (N2%) & Description
192
Part I
1 CCD, Laser,
8700 –Long
Range
2 CCD, Laser,
8700 –Long
Range
1 CCD, Laser,
8700 –Long
Range
Max. 64 CCD, Laser,
8700 –Long
Range
Min. 1 CCD, Laser,
8700 –Long
Range
Default Scan Engine
0 CCD, Laser,
8700 –Long
Range
0 CCD, Laser,
8700 –Long
Range
1 CCD, Laser,
8700 –Long
Range
Default Scan Engine