CipherLab 8 Series User Manual page 216

CipherLab BASIC Programming
INTERLEAVED 25
No. (N1%) Values (N2%) & Description
5 1: Enable Interleaved 25
0: Disable Interleaved 25
29 1: Transmit Interleaved 25 Check Digit
0: DO NOT transmit Interleaved 25 Check Digit
61 1: Interleaved 25 Code Length Limitation in Max/Min Length
Format
0: Interleaved 25 Code Length Limitation in Fixed Length
Format
62 Interleaved 25 Max Code Length / Fixed Length 1
63 Interleaved 25 Min Code Length / Fixed Length 2
Note
Length1 must be greater than Length2.
140 2: Verify Interleaved 25 OPCC Check Digit
1: Verify Interleaved 25 USS Check Digit
0: DO NOT verify Interleaved 25 Check Digit
144 1: Convert Interleaved 25 to EAN-13
0: No conversion
Transmit Check Digit
Decide whether or not to include the check digit in the data being transmitted.
Length Qualification
Because of the weak structure of the 2 of 5 symbologies, it is possible to make a "short scan"
error. To prevent the "short scan" error, define the "Length Qualification" settings to ensure that
the correct barcode is read by qualifying the allowable code length. Refer to Codabar.
Verify Check Digit
Decide whether or not to perform check digit verification when decoding barcodes.
 If true and the check digit found incorrect, the barcode will not be accepted.
Convert to EAN-13
Decide whether or not to convert a 14-character Interleaved 25 barcode into EAN-13. If true, the
next processing will follow the parameters configured for EAN-13.
 Interleaved 25 barcode must have a leading zero and a valid EAN-13 check digit.
Note: "Convert Interleaved 25 to EAN
204
Part I
Default Scan Engine
1 2D, (Extra)
Long Range
0 2D, (Extra)
Long Range
0 2D, (Extra)
Long Range
0 2D, (Extra)
Long Range
0 2D, (Extra)
Long Range
0 2D, (Extra)
Long Range
0 2D, (Extra)
Long Range