CipherLab 8400 Reference Manual
  1. Manuals
  2. Brands
  3. CipherLab Manuals
  4. Mobile computer
  5. 8400 Series
  6. Reference manual

CipherLab 8400 Reference Manual

8400 series
Hide thumbs Also See for 8400:
Table of Contents

Advertisement

Quick Links

Download this manual
8400 Series Mobile Computer
8400/8470
Version 1.10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8400 and is the answer not in the manual?

Questions and answers

Related Manuals for CipherLab 8400

Summary of Contents for CipherLab 8400

  • Page 1 8400 Series Mobile Computer 8400/8470 Version 1.10...
  • Page 2 Due to continued product development this information may change without notice. The information and intellectual property contained herein is confidential between CIPHERLAB and the client and remains the exclusive property of CIPHERLAB CO., LTD. If you find any problems in the documentation, please report them to us in writing.

  • Page 3: For Canada

    IMPORTANT NOTICES FOR USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 4: For Product With Laser

    DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. The use of any batteries or charging devices, which are not originally sold or manufactured by CipherLab, will void your warranty and may cause damage to human body or the product itself.

  • Page 5: Release Notes

    Modified: 1.7 Charging & Communications (battery charging fails when out of temperature range 0°C ~40°C) Modified: 3.11.5 Echo Tests — Wi-Fi signal table Modified: 3.6 Load Program — 8400 timeouts within 30 sec. 1.04 Mar. 09, 2010 Modified: 3.8 SD Card Menu — AG working directories Modified: 4.1.3 Upload —...
  • Page 6 Modified: 1.1.2 Backup Battery — 3.0 V/18 mAh (72 hrs.) 1.02 Oct. 30, 2009 Modified: 1.6 Data Capture — Chinese 25 disabled by default; ISBT 128 enabled by default Modified: 1.7.1 Interface Cable Options — update illustration Modified: 1.7.2 Cradle Options — update GPRS Cradle illustration; add note “Tighten the two screw-in connectors to secure the cable.”...

  • Page 7: Table Of Contents

    Safety Precautions ........................- 4 - Care & Maintenance ........................- 4 - RELEASE NOTES ..........................- 5 - INTRODUCTION ............................ 1 Getting Familiarized with 8400 ......................2 Features............................. 3 Inside the Package..........................3 Accessories............................3 Getting Started ..........................4 Inserting Battery &...
  • Page 8 8400 Series Mobile Computer Reference Manual 1.7.3 4-Slot Battery Charger .....................28 1.8 SD Card ............................. 29 1.8.1 File System ........................29 1.8.2 Directory..........................29 1.8.3 File Name.......................... 31 LEARNING SOFTWARE ARCHITECTURE..................... 33 2.1 Application Module........................35 2.1.1 FORGE Application Generator (AG) ................. 35 2.1.2 MIRROR Emulator (CipherNet) ..................36...
  • Page 9 8400 Series Mobile Computer Reference Manual 3.7.4 Echo Tests ........................57 3.7.5 Pairing Test........................60 3.7.6 Frequent Devices ......................61 3.8 SD Card Menu........................... 62 3.8.1 Run as USB Disk ......................62 3.8.2 Access SD Card ........................ 62 3.9 Ethernet Cradle Menu ......................64 3.9.1 Information ........................64...
  • Page 10 8400 Series Mobile Computer Reference Manual Vibrator seems not working......................96 Mobile computer seems not working.....................96 Cannot scan barcodes ........................96 Low battery condition.........................96 Barcode reader problem......................96 Cannot decode data after scanning....................96 Unreadable barcode ........................96 Un-programmed to read ......................96 Dirty scan window ........................

  • Page 11: Introduction

    This line of product comes with built-in Bluetooth technology and allows for optional module for 802.11b/g connectivity, enabling real time sharing of performance. The 8400 Series Mobile Computer is bundled with powerful and rich features to ensure success in timely processing of information, and thus, makes an ideal choice for inventory control, shop floor management, warehousing and distribution operations.

  • Page 12: Getting Familiarized With 8400

    8400 Series Mobile Computer Reference Manual GETTING FAMILIARIZED WITH 8400 Figure 1: Overview Description Description LED for Good Read and battery charging Buzzer LED for wireless communications LCD screen Keypad, 29 or 39 keys Communication/charging port Hand strap Battery compartment...

  • Page 13: Features

    INSIDE THE PACKAGE The following items are included in the package. Save the box and packaging material for future use in case you need to store or ship the mobile computer. 8400 Series mobile computer Rechargeable Li-ion battery pack Hand strap...

  • Page 14: Getting Started

    8400 Series Mobile Computer Reference Manual GETTING STARTED INSERTING BATTERY & MEMORY CARD For shipping and storage purposes, save the mobile computer and the main battery in separate packages. This will keep both batteries in good condition for future use.
  • Page 15 Introduction Figure 2: Installing the Main Battery & Memory Card...

  • Page 16: Initial Charging

    8400 Series Mobile Computer Reference Manual INITIAL CHARGING The main and backup batteries may not be charged to full for shipment. When you first receive the package, you will need to charge the main battery to full before using the mobile computer.

  • Page 17: Using 8400 Mobile Computer

    Chapter 1 USING 8400 MOBILE COMPUTER This chapter explains the features and usage of the 8400 Series Mobile Computer. The 8400 family includes: 8400 Bluetooth Class 2 8470 Bluetooth Class 2 + 802.11b/g IN THIS CHAPTER 1.1 Battery............... 7 1.2 Memory..............9 1.3 Keypad..............

  • Page 18: Backup Battery

    8400 Series Mobile Computer Reference Manual 1.1.2 BACKUP BATTERY The backup battery on the main board takes charge when the main battery is removed or drained out. When fully charged, the 3.0 V/18 mAh rechargeable Lithium button cell helps retain data in SRAM and maintain the running of the real-time clock and calendar for at least 25 days without the main battery.

  • Page 19: Memory

    Note: (1) When SD card is present, the card icon will appear on the screen and flash while being accessed. (2) For an SD card that has never been used on 8400, a message like “Found New SD Card” will be displayed allowing users to scan the card for memory check. If the action is canceled then, memory check can still be performed via System Menu —...

  • Page 20: Keypad

    8400 Series Mobile Computer Reference Manual 1.3 KEYPAD The mobile computer can be equipped with a keypad of 29 keys or 39 keys for system setup, user entry and so on. The keypad comes with programmable LED backlight, like the screen. Refer to 1.4 LCD...
  • Page 21 Chapter 1 Using 8400 Mobile Computer This alphanumeric keypad is set to numeric mode by default. The blue modifier key serves as a toggle among numeric, alpha (lower-case alphabetic), and ALPHA (upper-case alphabetic) input modes. Note: It is not necessary to hold down the blue modifier key.
  • Page 22 8400 Series Mobile Computer Reference Manual Below briefly describes the functions of common keys on the mobile computer. SCAN This yellow key is used to trigger the scan engine so that it can read a barcode when the reader function is enabled.
  • Page 23 Chapter 1 Using 8400 Mobile Computer Orange Modifier Key This key is a modifier key that requires pressing a second key to get the orange-coded function (F5~F8, Tab, Del) printed on the upper-right corner of the second key. Icon Description...

  • Page 24: 39-Key Layout

    8400 Series Mobile Computer Reference Manual 1.3.2 39-KEY LAYOUT The layout of the 39-key keypad includes numeric, navigation and function keys, as well as assorted characters and two modifier keys. Refer to Appendix III — Key Reference Tables for color-coded keys.
  • Page 25 Chapter 1 Using 8400 Mobile Computer This alphanumeric keypad is set to numeric mode by default. The blue modifier key serves as a toggle among numeric, alpha (lower-case alphabetic), and ALPHA (upper-case alphabetic) input modes. Note: It is not necessary to hold down the blue modifier key.
  • Page 26 8400 Series Mobile Computer Reference Manual Below briefly describes the functions of common keys on the mobile computer. SCAN This yellow key is used to trigger the scan engine so that it can read a barcode when the reader function is enabled.
  • Page 27 Chapter 1 Using 8400 Mobile Computer Orange Modifier Key This key is a modifier key that requires pressing a second key to get the orange-coded function (F11~F20, Tab, Del) or symbol printed to the right side of the second key.

  • Page 28: Lcd

    8400 Series Mobile Computer Reference Manual 1.4 LCD The mobile computer comes with a FSTN graphic LCD, 160 by 160 pixels resolutions, which can be programmed to display text or graphics, such as specific font and company logo, to meet varying application needs.

  • Page 29: Notifications

    Chapter 1 Using 8400 Mobile Computer 1.5 NOTIFICATIONS 1.5.1 STATUS LED There are two dual-color LED indicators above the screen. Both can be programmed to provide information that helps diagnosing. For example, if you are using AG runtime, you will be informed of the scanning result immediately. LED1 is used for "Good Read" and will become solid green upon reading a barcode successfully.

  • Page 30: Audio

    8400 Series Mobile Computer Reference Manual LED1: Red/Green Green User Power ON User definable User definable Solid green for Good Read by default Power Off, Battery System default System default Charging Flashing red: Charging Flashing green: Charging done Charging Error...

  • Page 31: Data Capture

    Chapter 1 Using 8400 Mobile Computer 1.6 DATA CAPTURE A wide variety of scan engines is available for delivering flexibility to meet different requirements. Depending on the scan engine integrated, the mobile computer is capable of scanning barcodes of a number of symbologies that are enabled by default while running the preloaded AG runtime.
  • Page 32 8400 Series Mobile Computer Reference Manual Chinese 25 Disabled Coop 25 Disabled Code 3 of 9 Code 39 Enabled Enabled Trioptic Code 39 Disabled Italian Pharmacode (Code 32) Disabled Disabled French Pharmacode Disabled EAN/UPC EAN-8 Enabled Enabled EAN-8 Addon 2...

  • Page 33: Charging & Communications

    Chapter 1 Using 8400 Mobile Computer 1.7 CHARGING & COMMUNICATIONS Normally, the mobile computer ships with a USB or RS-232 cable for charging and communications. A variety of cradles are available to meet different requirements. USB Interface Cable Task USB Cable...

  • Page 34: Interface Cable Options

    8400 Series Mobile Computer Reference Manual Note: Battery charging stops when the temperature drops below 0°C or exceeds 40°C. It is recommended to charge the battery at room temperature (18°C to 25°C) for optimal performance. 1.7.1 INTERFACE CABLE OPTIONS For charging via the USB cable, the standard charging current is 500 mA. However, we recommend you to connect the power adaptor to speed up charging the battery.

  • Page 35: Cradle Options

    Chapter 1 Using 8400 Mobile Computer 1.7.2 CRADLE OPTIONS The cradle is designed for charging and communications at the same time. You may choose a cradle type that best suits your needs. 1) Seat the mobile computer in the cradle.
  • Page 36 8400 Series Mobile Computer Reference Manual Charging & Communication Cradle Description Description LED Indicator (POWER) Cable Connector (USB or RS-232) Power Jack Modem Cradle Description Description LED Indicators (POWER, DATA, READY) Line/Phone Jack Line/Phone Jack Cable Connector (USB or RS-232)
  • Page 37 Chapter 1 Using 8400 Mobile Computer Ethernet Cradle Description Description LED Indicators (POWER, DATA, READY) Ethernet Port (RJ-45) Cable Connector (USB or RS-232) Power Jack IP Reset Switch GPRS/GSM Cradle (EDGE/Quad-band) Description Description LED Indicators (POWER, DATA, READY) SIM Card Slot...

  • Page 38: 4-Slot Battery Charger

    8400 Series Mobile Computer Reference Manual 1.7.3 4-SLOT BATTERY CHARGER Below is the 4-Slot Battery Charger. 1) The Battery Charger can be mounted on table or wall. Drill two holes (centers spaced 105 millimeters apart), secure the two supplied screws, and mount the Battery Charger by sliding over screws.

  • Page 39: Sd Card

    SD card can be accessed directly by using the provided functions in user application. Yet, when 8400 is equipped with SD card and connected to your computer via the USB cable, it can be treated as a removable disk (USB mass storage device) as long as it is configured properly through programming or via System Menu | 8.
  • Page 40 8400 Series Mobile Computer Reference Manual DAT Filename DAT file #1 TXACT1.DAT DAT file #2 TXACT2.DAT DAT file #3 TXACT3.DAT DAT file #4 TXACT4.DAT DAT file #5 TXACT5.DAT DAT file #6 TXACT6.DAT DBF Filename DBF file #1 Record file F1.DB0 System Default F1.DB1...

  • Page 41: File Name

    “ * + , : ; < = > ? | [ ] On 8400 Series, it can only display a filename of 1 ~ 8 characters (the null character not included), and filename extension will be displayed if provided. If a file name specified is longer than eight characters, it will be truncated to eight characters.
  • Page 42 8400 Series Mobile Computer Reference Manual...

  • Page 43: Learning Software Architecture

    Chapter 2 LEARNING SOFTWARE ARCHITECTURE This chapter mainly describes the software inside the mobile computer. It consists of three modules — Kernel, System, and Application; each has a function menu. When a menu is displayed, you may select an item by either of the following ways: Press the arrow keys (Up) (Down) to move the highlight bar.
  • Page 44 8400 Series Mobile Computer Reference Manual Figure 9: Software Architecture IN THIS CHAPTER 2.1 Application Module ............. 35 2.2 System Configuration & Core........37...

  • Page 45: Application Module

    Chapter 2 Learning Software Architecture 2.1 APPLICATION MODULE The mobile computer ships with software package on the CD-ROM. It includes FORGE Application Generator (batch and WLAN versions), MIRROR Emulator (VT and 5250 versions), download utilities, etc. 2.1.1 FORGE APPLICATION GENERATOR (AG) For easy development of applications, the mobile computer is preloaded with AG runtime.

  • Page 46: Mirror Emulator (Ciphernet)

    Companion Tool on PC End VT100/220 84xx-VT.SHX CipherNet-VT.exe IBM 5250 84xx-5250.SHX CipherNet-5250.exe 2.1.3 USER PROGRAM You may need to develop your own application program. For developing custom applications, CipherLab provides BASIC and C compilers through licensing. For detailed information, please contact your sales representative.

  • Page 47: System Configuration & Core

    For managing system configurations and multiple programs, each mobile computer comes with System Menu, Kernel, and Program Manager. Refer to the following chapters on how to configure the 8400 Series Mobile Computer, regarding system configurations and program download. 2.2.1 SYSTEM MENU System Menu is bundled with BASIC Runtime or user programs that are written in “C”.
  • Page 48 8400 Series Mobile Computer Reference Manual...

  • Page 49: System Menu

    Chapter 3 SYSTEM MENU System Menu is generated by a powerful utility, which offers an interface for engineers (programmers system integrator) view system information, change configuration parameters, download programs and run diagnostics. This menu is designed for engineering tests and maintenance ONLY. For this reason, it provides password protection to prevent unauthorized users from accidentally changing system settings.

  • Page 50: Information

    8400 Series Mobile Computer Reference Manual IN THIS CHAPTER 3.1 Information............... 40 3.2 Settings ..............42 3.3 Tests ............... 46 3.4 Memory..............48 3.5 Power ..............49 3.6 Load Program............50 3.7 Bluetooth Menu ............53 3.8 SD Card Menu ............62 3.9 Ethernet Cradle Menu ..........

  • Page 51: Understanding Device Code

    1= CCD scan engine 2= Laser scan engine 3= 2D scan engine 2nd digit Wireless module 4= Bluetooth + 802.11b/g (8470) 5= Bluetooth only (8400) 3rd digit Reserved 4th digit Reserved 5th digit Keypad module Keypad hardware version 6th digit...

  • Page 52: Settings

    8400 Series Mobile Computer Reference Manual 3.2 SETTINGS You can change the default settings here. System Settings Default Values Clock Current time Backlight 20 seconds at level 2, backlight shade enabled Contrast Level 4 Auto Off 10 minutes Power On Options...

  • Page 53: Contrast

    Chapter 3 System Menu 3.2.3 CONTRAST Set the contrast level for the LCD. Press the arrow keys (Up) (Down) to adjust the contrast level. 3.2.4 AUTO OFF The mobile computer will be turned off automatically when no operation is taking place during a specified period of time.

  • Page 54: Key Click

    By default, it is set to use one virtual COM port for all (=FIXED), regardless of how many 8400 mobile computers are connected to PC when USB Virtual COM is in use. This setting requires you to connect one 8400 at a time, and will facilitate configuring a great amount of 8400 mobile computers via the same virtual COM port (for administrators’...

  • Page 55: System Password

    Chapter 3 System Menu 3.2.11 SYSTEM PASSWORD Set a password to control user access to System Menu, Program Manager and Kernel Menu. The password can be up to eight alphanumeric characters. Note: The password is case-sensitive. To disable a previous password, enter blank on the "Input new password"...

  • Page 56: Tests

    8400 Series Mobile Computer Reference Manual 3.3 TESTS Here provides functional tests for key parts. 3.3.1 READER Test the reading performance of the scanner. The supported symbologies depend on the scan engine you use. Refer to 1.6 Data Capture for symbologies that are enabled by default.

  • Page 57: Echo Test

    Chapter 3 System Menu 3.3.6 ECHO TEST After a physical connection is established properly, run a test utility on your computer and start the test on your mobile computer. Select a desired baud rate if necessary. To stop and exit the test, press [ESC]. Interface Description Test Utility...

  • Page 58: Memory

    8400 Series Mobile Computer Reference Manual 3.4 MEMORY Here provides information and initialization function of the memory. 3.4.1 SIZE INFORMATION — onboard SRAM for data memory Flash — program memory 3.4.2 INITIALIZE Initialize the data memory. Warning! The contents of the data memory (SRAM) will be wiped out after memory...

  • Page 59: Power

    Chapter 3 System Menu 3.5 POWER Here shows current voltage consumption. Main (battery) It shows dynamic status of the battery pack, which is used as the main power source. Backup (battery) It shows dynamic status of the button cell, which is used to retain data in SRAM. Warning! Always examine the battery icon on the device screen so that you will be alerted for a low battery condition.

  • Page 60: Load Program

    8400 Series Mobile Computer Reference Manual 3.6 LOAD PROGRAM Here you can access the Load Program service provided by the kernel. Because the kernel will take over the job, you will not be able to return to System Menu by pressing [ESC].
  • Page 61 Bluetooth Approach the target Bluetooth enabled device. SD Card This option is available only when the memory card is present. Baud Rate Options Supported by CipherLab software, including download utilities 115200 (bps) 76800 (bps) 57600 (bps) 38400 (bps) 19200 (bps)
  • Page 62 8400 Series Mobile Computer Reference Manual LOAD PROGRAM VIA SD CARD Press the arrow keys to select a file. Then, press [ENTER] to view information of the program file. 1) If you have copied the desired program file(s) to your SD card, go to System Menu | 6.

  • Page 63: Bluetooth Menu

    Chapter 3 System Menu 3.7 BLUETOOTH MENU This submenu is for the mobile computer, with built-in Bluetooth module, to work with other Bluetooth enabled devices. You must configure these parameters correctly. Bluetooth Settings Default Value Connect Setting Items Need to Be Checked Local Name Model no.

  • Page 64: Information

    8400 Series Mobile Computer Reference Manual 3.7.1 INFORMATION Information of network configuration can be viewed here. Bluetooth Menu | 1. Information C library version MAC address of the Bluetooth module A name given to the mobile computer for identification. By default, it is made up of model number and the serial number. (Identical to 2.

  • Page 65: Connect Setting

    Chapter 3 System Menu 3.7.2 CONNECT SETTING Set the connection parameters if necessary. Local Name Enter a name for identifying the mobile computer. By default, it is made up of model number and the serial number. Remote Name Enter a name for making a specific connection. The remote name must be one of those in the Frequent Devices list.

  • Page 66: Security

    8400 Series Mobile Computer Reference Manual 3.7.3 SECURITY Set or modify security parameters. Authentication Options — Enable or Disable PIN Code Define the encryption key values. Up to 16 characters, using ASCII code. Note: When authentication is enabled without providing a pre-set PIN code, the mobile...

  • Page 67: Echo Tests

    Chapter 3 System Menu 3.7.4 ECHO TESTS These echo tests are used for verifying connectivity to make sure the mobile computer is within coverage. Press [ESC] to stop and exit the test. SPP: Serial Port Profile It is used for ad hoc networking. DUN: Dial-Up Networking Profile DUN Modem - It makes use of a Bluetooth modem or mobile phone as a...
  • Page 68 8400 Series Mobile Computer Reference Manual SPP Master Set the mobile computer as a master device. 1. Pairing with your computer (slave) must be completed first. 2. Run the utility “EchoTest.exe” on your computer. Associated settings include - Select “RS-232” for interface.
  • Page 69 Chapter 3 System Menu DUN GPRS The mobile computer will try to connect to a mobile phone with GPRS functionality. 1. Pairing with your mobile phone must be completed first. Select “DialUp Network” for Target Machine options. 2. Run the utility “EchoTest.exe” on your computer. Associated settings include - Select “TCP/IP –...

  • Page 70: Pairing Test

    8400 Series Mobile Computer Reference Manual 3.7.5 PAIRING TEST The pairing procedure is for the creation and exchange of a link key between two Bluetooth-enabled devices. The devices use the link key for future authentication when exchanging information. 1) The mobile computer will start with making an inquiry so that the system can generate a list of device(s) that has been discovered nearby.

  • Page 71: Frequent Devices

    Chapter 3 System Menu 3.7.6 FREQUENT DEVICES Here is a list of devices that the mobile computer has been connected to lately. After each successful pairing, the system will update it. This list can show information of one device that provides Serial Port (SPP), Human Interface Device (HID) or Dial-Up Networking (DUN) service.

  • Page 72: Sd Card Menu

    Note: (1) The SD card must be properly configured through programming or user menu before use. (2) Depending on the card capacity, it takes about 30 seconds or longer for PC to identify 8400 as a removable disk. 3.8.2 ACCESS SD CARD Edit the file system or format the SD card.
  • Page 73 System Menu Check Memory For an SD card that has never been used on 8400, a message like “Found New SD Card” will be displayed allowing users to scan the card for memory check. If the action is canceled then, memory check can still be performed here.

  • Page 74: Ethernet Cradle Menu

    8400 Series Mobile Computer Reference Manual 3.9 ETHERNET CRADLE MENU This submenu is for establishing an Ethernet connection via the Ethernet Cradle. You must configure these parameters correctly. Note: The menu is available only when an external library, 84PPP.lib or 84WLAN.lib, is included in your program (.SHX).

  • Page 75: Network Setting

    Chapter 3 System Menu 3.9.2 NETWORK SETTING Set parameters for IP networking. DHCP Options - Enable or Disable Subnet Mask Enter a new Mask IP, if necessary. Local IP Address Enter a new address for the mobile computer, if necessary. Default Gateway Enter a new address for the default Gateway, if necessary.

  • Page 76: Echo Tests

    8400 Series Mobile Computer Reference Manual 3.9.3 ECHO TESTS The Ethernet Cradle supports three working modes: Data Mode Modem Mode Transparent Mode These echo tests are used for verifying connectivity via the Ethernet Cradle. For details, refer to the Ethernet Cradle manual.

  • Page 77: Serial Ppp Menu

    Serial PPP Menu | 1. Information PPP library version Below are available libraries that support (1) PPP connection over serial links, and (2) Ethernet connection – Transparent mode. Series Model # External Libraries 8400 8400 (Bluetooth) 84PPP.lib 8470 (Bluetooth, 802.11b/g) 84PPP.lib or 84WLAN.lib...

  • Page 78: Connection Set

    8400 Series Mobile Computer Reference Manual 3.10.2 CONNECTION SET DialUp Number Enter the number provided by your ISP. Login Name Enter the login name provided by your ISP. Login Password Enter the login password provided by your ISP. Baud Rate...

  • Page 79: Echo Test

    Chapter 3 System Menu 3.10.3 ECHO TEST This echo test is used for verifying connectivity via Point-to-Point Protocol. Select “via Modem Cradle” if the mobile computer is seated in the Modem Cradle. For the Modem Cradle, its physical connectivity can be verified via System Menu | 3. Tests | 6.

  • Page 80: Wi-Fi Menu

    8400 Series Mobile Computer Reference Manual 3.11 WI-FI MENU This submenu is for 802.11b/g wireless networking. You must configure these parameters correctly. Note: The menu is available only when (1) the Wi-Fi module is present, and (2) the external library 84WLAN.lib is included in your program (.SHX).

  • Page 81: Information

    Chapter 3 System Menu 3.11.1 INFORMATION Information of network configuration can be viewed here. Wi-Fi Menu | 1. Information Wi-Fi library version Firmware version of the Wi-Fi module MAC address of the Wi-Fi module A name given to the mobile computer for identification. By default, it is made up of model number and the serial number.

  • Page 82: Network Setting

    8400 Series Mobile Computer Reference Manual 3.11.2 NETWORK SETTING Set parameters for IP networking. DHCP Options — Enable or Disable Subnet Mask Enter a new Mask IP, if necessary. Local IP Address Enter a new address for the mobile computer, if necessary.

  • Page 83: Wlan Setting

    Chapter 3 System Menu 3.11.3 WLAN SETTING Wireless networking can operate in two modes – (1) Ad-hoc mode: peer-to-peer, and (2) Infrastructure mode: point to multi-point through access points. Set the following parameters. Local Name Enter a name for identifying the mobile computer. By default, it is made up of model number and the serial number.
  • Page 84 8400 Series Mobile Computer Reference Manual Ad-Hoc This refers to peer-to-peer mode, without going through access points. Options — Enable or Disable Fixed BSSID This refers to the use of a specific AP’s MAC address as the fixed Basic Service Set Identifier.

  • Page 85: Security

    Chapter 3 System Menu 3.11.4 SECURITY Set or modify security parameters. WEP: Wired Equivalent Privacy EAP: Extensible Authentication Protocol WPA: Wi-Fi Protected Access Authentication Default authentication type [1] Open System This requires implementing WEP key. [0] Share Key WEP Menu Enable (For Share Key, it must be enabled!) WEP Setting Disable (default)

  • Page 86: Echo Tests

    8400 Series Mobile Computer Reference Manual 3.11.5 ECHO TESTS This function is used to measure the coverage of the range, estimate the number of APs and mobile computers needed, and determine the topology of deploying APs. Client Mode Set the mobile computer as a client. Enter the IP address of a server with which a connection is desired.
  • Page 87 The changing icon indicates 8400 is processing a pre-share key. Wait for a few seconds. The antenna icon will become ready and flashes to indicate 8400 is connecting to an access point under the same SSID.
  • Page 88 8400 Series Mobile Computer Reference Manual Once the connection of echo test is established, the details will be displayed as illustrated below. SNR (dB) RSS (-dBm) NF (-dBm) (Signal to Noise ratio) (Transmit Speed) (Received Signal (Noise Floor Level) Strength Level)

  • Page 89: Program Manager & Kernel

    Chapter 4 PROGRAM MANAGER & KERNEL This chapter explains Program Manager and Kernel that manage multiple programs and firmware upgrade. IN THIS CHAPTER 4.1 Program Manager ............79 4.2 Kernel ..............84 4.1 PROGRAM MANAGER The mobile computer supports multiple applications and languages. In the menu of Program Manager, it allows storing up to eight programs and has one activated for the current use.

  • Page 90: Download

    8400 Series Mobile Computer Reference Manual 4.1.1 DOWNLOAD Here provides a full list of programs that are currently stored on the mobile computer with size information. Multiple application programs can be downloaded through a variety of interfaces. Upon completion of downloading, you are allowed to input a name for the program.
  • Page 91 Chapter 4 Program Manager & Kernel SPARE MEMORY SECTORS (1 ~ 7) Additional program files can be directly downloaded to these sectors. Download a program file to an empty sector: 1. Press the arrow keys (Up) (Down) to select an empty sector, and then press [ENTER].

  • Page 92: Activate

    8400 Series Mobile Computer Reference Manual 4.1.2 ACTIVATE The list shows the entire spare programs stored on the mobile computer. From the list, you can select from the memory sector (1 ~ 7) or SD card. The selected program will be copied to the active memory sector and replace the current one.

  • Page 93: Upload

    Chapter 4 Program Manager & Kernel 4.1.3 UPLOAD You may duplicate one or all of the programs from the mobile computer to a host computer or another mobile computer. This can be used to clone software on mobile computers. Note: To clone all of the programs, the target mobile computer cannot have any other program downloaded except the active one;...

  • Page 94: Kernel

    8400 Series Mobile Computer Reference Manual 4.2 KERNEL The kernel resides in the innermost core of the system. It has the highest security and is always protected by the system. When the application program is corrupted and System Menu fails at the same time, Kernel Menu provides an access to fix the system.

  • Page 95: Kernel Information

    Chapter 4 Program Manager & Kernel 4.2.1 KERNEL INFORMATION Here provides important system information to help diagnose the system. Kernel Menu | 1. Information Hardware version Serial number of the mobile computer Manufacturing date Kernel version 6-digit code for optional hardware configurations Refer to Understanding Device Code.

  • Page 96: Load Program

    8400 Series Mobile Computer Reference Manual 4.2.2 LOAD PROGRAM You can download one program file to the active memory sector, as well as one font file to the memory address assigned by the system. After downloading, restart the mobile computer to activate the new program. Refer to Appendix I Download Utility.
  • Page 97 Bluetooth Approach the target Bluetooth enabled device. SD Card This option is available only when the memory card is present. Baud Rate Options Supported by CipherLab software, including download utilities 115200 (bps) 76800 (bps) 57600 (bps) 38400 (bps) 19200 (bps)
  • Page 98 8400 Series Mobile Computer Reference Manual LOAD PROGRAM VIA SD CARD Press the arrow keys to select a file. Then, press [ENTER] to view information of the program file. 1) If you have copied the desired program file(s) to your SD card, go to Kernel Menu | 2.

  • Page 99: Kernel Update

    Do not turn off the mobile computer while downloading a kernel update or re-starting the mobile computer. Otherwise, it will crash the kernel forever. There is no way to recover it! Note: CipherLab software, including download utilities, supports the following baud rate options: 115200/57600/38400/19200/9600 bps.

  • Page 100: Test & Calibrate

    8400 Series Mobile Computer Reference Manual 4.2.4 TEST & CALIBRATE This tool is provided for manufacturing use. Warning! You should not perform this test. 4.2.5 BLUETOOTH MENU Refer to 3.7 Bluetooth Menu for details. This submenu is almost the same as the one...

  • Page 101: Specifications

    SPECIFICATIONS Model Designation 8400 8470 Wireless Bluetooth Class 2 √ √ Communications 802.11b/g √ Readers Barcode Reader CCD (linear imager) Standard Laser 2D Imager Electrical Main Battery Rechargeable Li-ion battery – 3.7 V, 1800 mAh Characteristics Working Time Laser, one scan per 5 seconds, without backlight:...
  • Page 102 8400 Series Mobile Computer Reference Manual Environmental Temperature Operating: -10 °C to 60 °C Characteristics Storage: -20 °C to 70 °C Humidity Operating: 10% to 90% non-condensing Storage: 5% to 95% non-condensing Impact Resistance 1.5 m, 5 drops per 6 sides...

  • Page 103: Download Utility

    Appendix I DOWNLOAD UTILITY For easy development of applications, the mobile computer ships with FORGE Application Generator programs, batch and WLAN versions, as well as a download utility. FILE TYPES Depending on the file type, you may download a program or font file via System Menu, Program Manager or Kernel Menu.

  • Page 104: Progload.exe

    Any C program, such as AG Runtime, BASIC Runtime, font file, etc. .SYN file Any BASIC program after BASIC Runtime has been installed first. Note: (1) For 8400, USB Virtual COM shares the interface option of RS-232/IrDA. (2) Cradle-IR is not supported on 8400.

  • Page 105: Troubleshooting

    Try to re-charge the battery and monitor the charging status. Warning! Only use batteries or charging device manufactured by CipherLab. The use of wrong battery or charging device could result in damage to human body or the product itself, and will void your warranty.

  • Page 106: Keypad Seems Not Working

    8400 Series Mobile Computer Reference Manual KEYPAD SEEMS NOT WORKING Perform the keyboard test. (See 3.3.4 Keyboard.) If the problem persists, reload the battery pack and perform the test again. VIBRATOR SEEMS NOT WORKING Perform the vibrator test. (See 3.3.7 Vibrator.)

  • Page 107: Out Of Scanning Range

    Appendix II Troubleshooting OUT OF SCANNING RANGE Try adjusting the scanning distance from the scanner to the barcode. CANNOT TRANSMIT/RECEIVE DATA USING RS-232 CABLE Check if the RS-232 connection is correct and secured. Make sure the serial port parameters on the host are configured to match the serial parameters on the mobile computer.

  • Page 108: Via Ethernet Cradle

    8400 Series Mobile Computer Reference Manual VIA ETHERNET CRADLE Check if the Ethernet connection is correct and secured. Make sure the networking parameters are configured properly. Try to establish connection again. Make sure the mobile computer is well seated inside the cradle. DO NOT remove the mobile computer or disconnect the cradle before communications are done.

  • Page 109: Key Reference Tables

    Appendix III KEY REFERENCE TABLES 29-KEY KEYPAD SYSTEM DEFAULTS Blue Blue Orange key Orange key pressed pressed pressed pressed once twice once twice BkSp BkSp PQRS pqrs WXYZ wxyz...

  • Page 110: Extended Function Keys

    8400 Series Mobile Computer Reference Manual EXTENDED FUNCTION KEYS Blue Blue Orange key Orange key pressed pressed pressed pressed once twice once twice PQRS pqrs WXYZ wxyz Extended Function Keys must be enabled through programming! BkSp BkSp...

  • Page 111: 39-Key Keypad

    Appendix III Key Reference Tables 39-KEY KEYPAD SYSTEM DEFAULTS Blue Blue Orange key Orange key pressed pressed pressed pressed once twice once twice < > &...
  • Page 112 8400 Series Mobile Computer Reference Manual Blue Blue Orange key Orange key pressed pressed pressed pressed once twice once twice BkSp BkSp...

This manual is also suitable for:

8470

Table of Contents