CipherLab 8 Series User Manual page 250

CipherLab BASIC Programming
LE? (N1%,N2%)
LED(...)
LEFT$(X$,N%)
LEN(X$)
LINE(...)
LOCATE(N1%,N2%)
LOCK
LT? (N1%,N2%)
MAIN_BATTERY
MENU(Item$)
MEMORY_INFORMATION(N%)
MID$(X$,N%[ ,M%])
MOD(N1%,N2%)
MOVE_TO(file%[,index%],recor
d_number%)
MOVE_TO_NEXT(file%[,index%]
)
MOVE_TO_PREVIOUS(file%[,ind
ex%])
MUL(N1%,N2%)
NEG (N1%)
NEQ? (N1%,N2%)
NCLOSE(N%)
NOT
NREAD$(N%)
NWRITE(N%,A$)
OCT$(N%)
OFF_ALL
OFF_COM(N%)
OFF_ESC
OFF_HOUR_SHARP
OFF_KEY(number%)
OFF_MINUTE_SHARP
OFF_READER(N%)
238
Part I
Indicating the decision "IF N1% <= N2%" is processed.
Indicating the command LED is processed.
Indicating the command LEFT$ is processed.
Indicating the command LEN is processed.
Indicating the command LINE is processed.
Indicating the command LOCATE is processed.
Indicating the command LOCK is processed.
Indicating the decision "IF N1% < N2%" is processed.
Indicating the command MAIN_BATTERY is processed.
Indicating the command MENU is processed.
Indicating the command MEMORY_INFORMATION is processed.
Indicating the command MID$ is processed.
Indicating a modulo operation is processed.
Indicating the command MOVE_TO is processed. file% is the
number of the DBF file; index% is the number of the IDX file;
record_number% is the record number to move to.
Indicating the command MOVE_TO_NEXT is processed.
Indicating the command MOVE_TO_PREVIOUS is processed.
Indicating a multiplication is processed.
Indicating a negation is processed.
Indicating the decision "IF N1% <> N2%" is processed.
Indicating the command NCLOSE is processed. N% is the
connection number.
Indicating the logical operation NOT is processed.
Indicating the command NREAD$ is processed. N% is the
connection number.
Indicating the command NWRITE is processed.
Indicating the command OCT$ is processed.
Indicating the command OFF ALL is processed.
Indicating the command OFF COM is processed. N% is the
number of the COM port.
Indicating the command OFF ESC is processed.
Indicating the command OFF HOUR_SHARP is processed.
Indicating the command OFF KEY is processed.
Indicating the command OFF MINUTE_SHARP is processed.
Indicating the command OFF READER is processed. N% is the
number of the reader port.