2.2 EDIT MENU
Seven commands are provided here to facilitate the editing of the BASIC source code.
Command
To Do...
Undo
Function
Operation
Function
Cut
Operation
Function
Copy
Operation
Function
Paste
Operation
To abort the previous editing command or action.
Click "Edit" on the menu bar and select "Undo".
For the same function, press hot key CTRL+ Z or click the [Undo]
icon on the tool bar.
To cut a paragraph off the text and place it on the clipboard. The
paragraph will be removed.
Drag the cursor to select the paragraph to be cut off. This
paragraph will be highlighted (in a reverse color). Click "Edit" on
the menu bar and select "Cut".
For the same function, press hot key CTRL+ X or click the [Cut]
icon on the tool bar.
To copy a paragraph from the text to the clipboard.
Drag the cursor to select the paragraph to be copied. This
paragraph will be highlighted (in a reverse color). Click "Edit" on
the menu bar and select "Copy".
For the same function, press hot key CTRL+ C or click the [Copy]
icon on the tool bar.
To paste a paragraph from the clipboard into the text. This
paragraph will be inserted to the text.
Move the cursor to the insertion point where the paragraph will be
inserted, and left-click the mouse. Click "Edit" on the menu bar
and select "Paste".
For the same function, press hot key CTRL+ V or click the [Paste]
icon on the tool bar.
Chapter 2
Using BASIC Compiler
11
Need help?
Do you have a question about the 8 Series and is the answer not in the manual?