CipherLab 8 Series User Manual page 4

5.03 Feb. 19, 2014 Part I
 Replace "RSS" with "GS1 DataBar"
Modified: Chapter 1 – Windows 95/98/7 supported (chapter 1, 2)

 Modified: 2.3 Configure Menu – descriptions for "Create DBF Files"
command revised
 Modified: 4.15 KEYPAD COMMANDS | 4.15.1 GENERAL –
>8000 supports
SET_PWR_KEY commands
>SET_MIDDLE_ENTER command added for 8400/8700
>SET_PISTOL_ENTER command added for 8200/8700
 Modified: 4.18 Fonts | 4.18.4 Special Font Files –
>Turkey (33) added to GET_LANGUAGE, SET_LANGUAGE
Modified: Appendix I - SYMBOLOGY PARAMETER TABLE I

>No. (N1%): 54, 173, 174, 175, 176, 177, 178, 179 added
 Modified: Appendix I - SYMBOLOGY PARAMETER TABLE II
>No. (N1%): 94 (Disable TCIF Linked Code 39 by default)
>No. (N1%): 174, 176 ~ 179/181 ~ 188 added
 Modified: Appendix II Symbology Parameters –
Scan Engine, CCD or Laser
>Code39: No. 173
>CODE 128/EAN-128/ISBT 128: No. 174
>GS1 DataBar FAMILY: No. 175
>UPC/EAN FAMILIES: No. 54
>UPC/EAN FAMILIES: UPC-E Triple Check descriptions
SCAN ENGINE, 2D OR (EXTRA) LONG RANGE LASER
>CODE 128 | UCC/EAN-128: No. 174
>GS1 DataBar FAMILY: No. 183~185
2D SCAN ENGINE ONLY
>COMPOSITE CODES | CC-A/B/C: No. 186~187
>TLC-39: No. 94 (Disable TCIF Linked Code 39 by default)
>2D SYMBOLOGIES|MAXICODE, DATA MATRIX & QR CODE: No. 188
 Modified: Appendix III Scanner Parameter –
>READ REDUNDANCY: No. 182
>USER PREFERENCES: No. 181
Part II
- None –
OSK_TOGGLE, GET_TRIGGER, SET_TRIGGER,