CipherLab 8 Series User Manual page 5

5.02 Mar. 27, 2013
5.01 Dec. 07, 2012
4.24 Oct 24, 2012
Part I
 Modified: 4.7.2 Code Type – CodeType Table II: add 8400/8700 2D
scan engine to Composite_CC_A/B/C symbologies (Decimal
47/55/118)
 Modified: 4.15.1 General – OSK_TOGGLE, SET_PWR_KEY: support
for 8400/8700 added
 Modified: Appendix I – Symbology Parameter Table II: add
8400/8700 2D scan engine to No. 44 (Convert UPC-A to EAN-13)
Modified: Appendix II – Scan Engine, 2D or (extra) Long Range

Laser: add 8400/8700 2D scan engine to No. 44 (Convert UPC-A to
EAN-13)
Part II
- None –
Part I
 Modified: 1.1 Directory Structure – Font Files (8200/8400/8700)
Modified: 4.7.2 Code Type Table II – Symbology added (No.

47/55/118)
 Added: 4.15 Keypad Commands – OSK_TOGGLE, SET_PWR_KEY
commands added
 Modified: 4.15.2 ALPHA KEY – GET_ALPHA_STATE command
removed
 Modified: 4.18.1 Font Size – 20x20 added
 Modified: 4.18.4 – SELECT_FONT command modified
 Modified: Appendix I – Symbology Parameter Table II – value &
description added (No. 44)
Part II
- None –
Part I
 Modified: 4.15 Keypad Commands│4.15.1 General –
SET_TRIGGER, GET_TRIGGER commands added for
8200/8400/8700; CHECK_ENTER_KEY for 8200/8700;
SET_MIDDLE_ENTER for 8200
 Modified: 4.16 LCD Commands│4.16.1 Properties – BACKLIT
command revised; GET_BKLIT_LEVEL, SET_AUTO_BKLIT,
SET_BKLIT_LEVEL commands added for 8200/8400/8700
 Modified: 2.5 Help Menu one command is provided (not three)
 Modified: Appendix VII Key Code Table – MCR/LCR/RCR added
for 8200; LCR/RCR added for 8700
Part II
 New: 4.3 Scanning for Wi-Fi Hotspots – WIFI_SCAN command
added for 8200/8400/8700