Setting Scent Intensity; Scent Control - Prolitec AirQ 1280 Original Instructions Manual

Setting Scent Intensity

1. Determine the approximate size of the room in cubic feet or cubic meters by multiplying length
x width x ceiling height.
2. Consult the Room-Size Table
POINT.
Hint: There are many variables to finding the scent level that works:
size, airflow, number of fresh air changes per hour, number of people in
the space and, most of all, user preferences. Experiment with different
levels until you are satisfied. Utilize the S4 Tool.

Scent Control

If you followed the Room-Size Table
for your room size. If after one hour you feel the scent is not detectable, increase the setting by
about 10%. For example, if your start setting was 20, increase it by 10%, or to setting 22. Keep
increasing until you and others in the space can detect a slight scent throughout the space.
The Last Step
1. Set the appliance to either 24/7 or RUN PROGRAM.
2. Make sure the power is on.
3. Close and lock the door, storing the key in a known place.
AirQ 1280
to give you a level (1 to 50) to set. THIS IS ONLY A STARTING
or S4 Tool, you have set AirQ 1280 to the low end of the range
OPERATING INSTRUCTIONS
8
16