OPERATING INSTRUCTIONS
Unit Programming
1.
Unlock and open the door.
2.
Turn on the power by pressing
3.
Set the Clock.
I
• Press
to cycle through the modes to the options mode. The day of the week will blink.
• Adjust the day forward or backward using
L
• Press
to set the day of the week and the hour will blink.
• Adjust the hour forward or backward using
L
• Press
to set the hour and the minute will blink.
• Adjust the minute forward or backward using
L
• Press
to set the minute and the hour and minute will both blink.
• Change between 24-hour and 12-hour modes using
L
• Press
to set the time mode and the off-cycle will blink.
• Change between normal (NOC, 7 minutes), short (SOC, 2 minutes), and very short (VSOC, 30
seconds) modes using
L
• Press
to set the off-cycle and the fan setting will blink.
• Adjust the fan speed up or down using
L
• Press
to set the fan speed and the day of the week will blink.
24/7 Mode.
4.
• If you want AirQ 1280 to run continuously — 7 days a week, 24 hours a day — press
24/7 is displayed above the time. If not, skip to Step 5.
5.
SET PROGRAM Mode.
I
• Press
until SET PROGRAM is displayed above the time. The program number will blink in
the lower right corner of the display
• Adjust the program number forward or backward using
L
• Press
to set the program number and the status will blink.
• Adjust the status between on ("
AirQ 1280
:
on the control panel.
E
F
or
E
F
or
E
E
F
or
.
E
F
or
.
") and "off" ("
on
o
]OPERATING INSTRUCTIONS
.
.
F
or
.
E
F
or
.
E
F
or
.
F") using
E
F
or
.
8
I
until
12