Table of Contents
Advertisement
Fig. A
Injector Tube
AirQ 1280
Fig. B
CORRECT
Appliance Installation
1. Place the appliance onto the desired location on the wall or AHU and ensure that it is level.
2. Fasten the appliance to the wall or AHU using necessary screws.
3. Attach an AC cord and connect to a nearby outlet.
4. Assemble the plume connector
Assembling the Plume Connector
•
Roll O-rings into grooves (Fig 1)
•
Insert assembly into cap, barbed end first, so that threads of cap cover O-rings (Fig 2)
•
Push tube over barbed end of cap assembly (Fig 3)
•
Push tube over barbed end of bulkhead fitting (Fig 4)
•
Tightly secure tube in position with ZipTies (Fig 5)
•
Cut off excess tie (Fig 6)
•
Push exposed threaded portion of assembly through gasket (Fig 7)
AirQ 1280
]INSTALLATION: DIffusion via HVAC System
Injector Hose
Power
Source
INCORRECT
9
21
Hide quick links:
Advertisement
Table of Contents
