Chapter 7: User Maintenance; Changing The Cartridge - Prolitec AirQ 1280 Original Instructions Manual

USER MAINTENANCE

Changing the Cartridge

1. Unlatch and open the door to access the cartridge: The door should be opened only to perform
a cartridge or programming change. When in use, the door must be closed.
2. Press POWER button to turn appliance OFF.
3. Remove air nozzle (located on the side of
the cartridge head) by rotating 90 degrees
and pulling.
4. Detach plume kit from the cartridge output
port (located on the top of the cartridge
head). This is done by unscrewing the cap
from the cartridge output port and pulling
out.
5. Remove cartridge from appliance enclosure.
6. Install new cartridge, place and tighten plume kit firmly on cartridge output port.
7. Insert air nozzle and rotate the handle 90 degrees until secured (by stem retaining tab on
cartridge head).
8. Turn appliance ON. Verify that the plume is not escaping inside the enclosure and that all
connections are tight. Close the door when complete.
AirQ 1280 USER MAINTENANCE
7
10