Download Print this page

Prolitec AirQ AQ150 Quick Start Manual

Advertisement

Quick Links

AQ150
Quick Start Guide
Original Instructions
Updated Feb. 03, 2015
Adjustable Scent System
1. To remove cover, locate release tab at bottom of the unit, press in, and lift cover
up and off with other hand
1

Advertisement

loading

Summary of Contents for Prolitec AirQ AQ150

  • Page 1 AQ150 Quick Start Guide Original Instructions Updated Feb. 03, 2015 Adjustable Scent System 1. To remove cover, locate release tab at bottom of the unit, press in, and lift cover up and off with other hand...
  • Page 2 2. Remove the yellow battery insulator tab at bottom of appliance. 3. Connect the power cord to the underside of the appliance, and the appropriate, country-specific plug to the power block. Plug the power block into an AC outlet within reach of the location you have chosen for AirQ.
  • Page 3 4. Cartridge: remove top screw-off cap and bottom red plug (save these for future storage) and foil seal. Insert cartridge, pressing firmly until cartridge sits in place.
  • Page 4 5. To activate cartridge and relieve pressure from shipping: using a tissue or paper towel, press in the stem in the center of the top output chimney; the stem should spring back.
  • Page 5 6. Turn power button on. Turn dial to Run 24/7 setting. (For full programming and clock setting instructions, refer to User Guide). IMPORTANT: Always turn power off when removing and replac- ing the AirQ cover to prevent pressure build-up in the cartridge. Also, power must be turned off before moving AirQ around to prevent pressure build-up.”...
  • Page 6 7. Replace cover, carefully aligning with the control buttons; press until cover “clicks” in place. Insert the Director Attachment. Use of the Director Attachment allows AirQ to operate at its most quiet level. 8. Position the AirQ appliance in desired location. AirQ must not be tilted or turned upside down when cartridge is inside;...
  • Page 7 9. A solid blue light in the Power button confirms the appliance is on. 10. Scent Intensity Level: consult Room Size Chart (page 8) for beginning setting. IMPORTANT The AirQ scent intensity levels are designed through the use of on and off duty cycles. Therefore, a higher scent intensity setting will cause the unit to cycle on for longer periods of time.
  • Page 8 6 x 8 Large 8 x 8 Bedrooms & Living Rooms Small 9 x 10 Medium 12 x 15 Large 20 x 18 Prolitec Product Safety and Support toll-free 1-866-387-4333 or go to www.airqhome. For online safety instructions, visit www.airqhome.com...